Water is crucial for all living things on Earth. It is, indeed, life, as many of you have always known. It is the major solvent in humans and contains numerous vital minerals such as ions, magnesium, and calcium.
Scientists estimate that our bodies’ overall weight accounts for 70% of our entire weight, which is more than half of the weight we carry. Water, with all of its benefits, has also been shown to pose serious health dangers if not carefully analyzed and the necessary safeguards are not taken.
Having stated that, there are several types of water based on the purification process and technologies used. Have you ever heard of distilled water or zero water? Allow me to shed more light on the two of them.
First here is a summary of our findings.
Zerowater is achieved using a five-stage filtration and ion exchange process that removes 99.7 percent of total dissolved solids, fluoride, iron, and beneficial minerals such as potassium, sodium, and calcium. Distilled, on the other hand, water is heated to the boiling point, then collected and cooled to its original form, rendering it free of microorganisms and pathogens.
Distilled Water vs Zerowater Comparison Table
Zerowater filtration systems use activated carbon, coarse filter screens, ion exchange, foam disruptors, and ultra-fine screens to remove toxic metals, chlorine, and fluoride that are common in tap water.
Distilled water is produced by boiling water, then collecting and cooling the steam to revert to water. This procedure is highly effective in removing contaminants, minerals, and pollutants, but it leaves the water tasteless and less flavorful.
If you are seeking for clean and pure water that is free of fluoride, mercury, chromium, radium, and asbestos, then zerowater is the better alternative. As the company claims to eliminate up to 99 percent of water impurities.
On the other hand, distilled water is free of both poisonous chemicals and hazardous minerals that are commonly found in tap water, but it always tastes flat and has less flavor.
Distilled water Closer Look
This is made possible by heating the water to its maximum boiling point to the point that it starts forming vapor. The vapor is then collected and condensed and the resulting liquid is what is known as distilled water.
This water is safe for drinking since it contains fewer impurities. It is mainly used in scientific laboratories for research purposes since it is considered free from microorganisms and pathogens.
The good thing about it is that during the distillation process, it retains minerals needed by the body such as calcium and magnesium just to mention a few. The process of distillation is cheaper and easier compared to the zero water purification process.
On the other hand, it is well known that water has no taste, trust me it does. There is still that distinct thirst-quenching taste that distilled water does not have. It is also more on the acidic side than the alkaline side which the body needs.
- Distilled water is a parasite, bacterium, pathogen, and virus-free.
- When it comes to detoxification, Distilled water is effective and beneficial because it has the power to flush out poisonous substances from the human body.
- In comparison to tap water, which has a chlorine taste, distilled water is the best since it eliminates the smell and taste of chlorine.
- It is less expensive in terms of processing because the zerowater requires the purchase of a water pitcher.
- Distilled water has no taste; it lacks the natural flavor of water.
- It is necessary to have a high boiling point in order to eliminate all of the contaminants from the water.
- Distillation requires a lot of energy to be successful, hence it is not energy efficient.
Zero water Closer Look
This sort of filtered water contains almost no contaminants or minerals, as the name implies. It is simply pure water made up of hydrogen molecules and oxygen, with the company guaranteeing that there are no impurities.
The zerowater concept is based on cleaner and better-tasting water, which is produced by a series of water filtration stages that eliminate 99 percent of total dissolved solids such as sodium chloride, magnesium, and calcium.
The Zerowater employs a premium 5-stage ion exchange system, which includes:
Step 1: The coarse filter screen removes silt and particles from water.
Step 2: Water is squeezed through a foam distributor.
Step 3: Water oxidation and carbon reduction are activated.
Step 4: Water is cleansed of all impurities by ion exchange resin.
Step 5: This stage is intended to filter out any impurities that may have passed through the previous stage by accident; the ultra-fine screen filters the smallest particles found in water.
When compared to distilled water, a Zerowater water filter is one of the simplest and least messy ways to filter water at home. This is made possible by water pitchers, which are widely available and inexpensive on the internet.
The pitcher comes with a handheld TDS meter, which measures the total dissolved solids in the water; the electrode on the meter detects ion presence in the water.
- To obtain pure water, Zerowater filtration includes an easy-to-use procedure.
- Remove up to 99 percent of water contaminants found in tap water, such as fluoride, chlorine, and lead.
- The filtration process does not require the use of energy; instead, water is filtered using gravity pull.
- There is no water waste when filtering is taking place.
- Includes a TDS meter for measuring mineral concentrations before and after filtering the water.
- Zerowater filters have a tendency to remove critical minerals that are essential to the human body.
- Needs filter replacement, which comes at an additional expense to the consumer.
Check our Detailed Comparison of the Top Water Filters Pitcher Aquagear vs Zerowater vs Brita
What can I use instead of Distilled Water?
Because of the process and machines involved, distilled water may sometimes not be within your reach. Do not panic because there are a few alternatives close to it that might serve the same purpose you want.
Boiled water – this is the most available of all purified water you can get. Put water to boil to 100 degrees Celsius and most impurities will be gotten rid off with your good minerals still intact. It can be used to drink, cook, clean but cannot be used in the laboratories since not all impurities will be cleared.
Mineral water – it is mainly bottled water found in supermarkets. It is clean enough to drink but not as purified as distilled water. Oh yes, it has a lot of minerals that you need in it.
Springwater- it’s gotten from the natural water springs found on rocks and undergoes some purification process but not as detailed as distilled water.
How do you make Distilled water drinkable?
In our current world, contamination and pollution has become the normal norm. This has caused strange infections with people losing lives every day.
People have become cautious with what they take and drink. Distilled water has become the main alternative as one of the safest drinking water despite its taste and the minerals lost during purification.
Apparently, you can make up for your distilled water by making it tastier, healthier and safer using the following alternatives. Add natural flavors -these include fruit flavors either powdered or blended ones. Himalayan salt can also be used to add flavor and the minerals found in it.
Buy water bottles that have filters that infuse minerals to compensate for the ones lost.
Buying a trace of mineral drops and adding to your water will make work more easier and your water drinkable.
Does zero water remove pesticides?
Yes, zerowater water has the ability to remove up to 99 percent of pesticides in water. This is made possible by the 5 filtering stages that water is passed through. Pesticides that are removed include lindane, carbofuran, and dieldrin.
Furthermore, the ion exchange filter removes herbicides such as simazine, atrazine, and alachlor, leaving your drinking water completely clean and safe to drink.
What is the Zero water filter lifespan?
The lifespan of a Zerowater filter ranges from 2 to 4 months, depending solely on how frequently the water pitcher is used. Each filter has a capacity of around 18000 milligrams, therefore if the TLD reads ‘006’, the filtered water quality has degraded and a filter change is required.
Does zero water remove calcium?
Yes, the five filtration stages ensure that all dissolved solids in water, including magnesium and calcium, are removed; additionally, the filter comes with a meter that allows one to measure the concentration of dissolved solids in the filtered water. When the TDS meter reads 0, it means that all of the calcium in the water has been filtered.
Is boiled water the same as distilled water?
Boiled water is not the same as distilled water. Distilled water is just water that has cooled from water vapour after boiling tap water to 100 degrees. During the distillation process, all contaminants such as microorganisms and minerals are removed.
In contrast to boiled water, when water is heated to a higher temperature till it reaches boiling points. This means that fewer impurities in water are stripped, but they are ones that cannot be removed during the boiling process.
What are the benefits of distilled water?
- Distilled water can help protect your teeth from fluoride damage; hence, the water does not contain fluoride.
- Aids in the removal of toxins from the body and, according to research, can aid in the reduction of body weight.
- The procedure of obtaining distilled water is fairly simple, as one may simply use a readily available item at home.
Daniel Keringet is a market researcher and publisher (Best Osmosis Experts) who got an interest in topics related to
Water safety out of curiosity and passion from the time he got into college. Now he is a full-time writer living in Naperville Illinois.